Manufacturer of Electronic Test Accessories                                                                                             E-mail: info@e-z-hook.com Order Direct: 800.995.4665   

E-Z-Hook Supports the RoHS Directive

Join us on Facebook  Join us on Twitter

 

Ordering Information

  • Order Direct or from a large selection of distributors
  • No minimum order requirements
  • Most standard items are available for immediate shipment
  • Before placing your order make sure you have the correct
    • Part Number
    • Color or Set information
  • Lead length is measured in inches for any test lead or cable assembly.

Color Information

E-Z-Hook offers most parts in 10 standard color options and multiple color combinations through our kilo-color system. The standard colors are shown in the table below and can be called out using the abbreviation or resistor color code numbering system.

To order kilo color combinations please view the kilo-color chart.

Kilo Colors
Click to Enlarge

Standard Colors
Click to Enlarge

Set Information

Standard pricing is for single color bulk packaging unless otherwise indicated. All colored parts can be available in standard set combinations. If pricing is not shown please contact factory.

  • R/B = 1 Red, 1 Black
  • S = 1 each of 10 colors
  • S(color) = 10 of one color
  • S14 = Set of 10 solid standard colors, plus 4 kilo colors
  • S16 = Set of 10 solid standard colors, plus 6 kilo colors

Lead Length

E-Z-Hook offers a selection of standard length test leads, patch cords, and cable assemblies. We also offer custom lengths to fit special requirements. All length measurements are made in inches, see diagrams below for measuring examples:

Lead Length

Lead Length
Click to Enlarge

Cable Length

Cable Length
Click to Enlarge

Standard lengths in inches for test lead and patch cord assemblies:
4" (10cm)24" (60cm)
6" (15cm)36" (90cm)
8" (20cm)48" (120cm)
12" (30cm)60" (150cm)
18" (45cm)*other lengths available
Standard lengths in inches for cable assemblies:

6" (15cm)30" (75cm)
12" (30cm)36" (90cm)
18" (45cm)48" (120cm)
24" (60cm)60" (150cm)
*other lengths available

Field Servicing Information

Most hooks are designed to be field serviceable.To replace a lead wire, pull on the plunger until it slips free of the body. Strip lead wire 3/4" (19mm), feed wire through plunger and wrap around terminal as shown in figure 1. Solder and cut off excess wire at solder point. Reassemble part, making sure the terminal and nylon fins enter their respective grooves. Keep slack in lead wire pulled out while assembling to prevent binding.

NOTE: To disassemble XM Micro-Hook connectors or leads, actuate plunger to expose hook and grasp behind hook with long nose pliers before pulling plunger off. Failure to do so will result in damage to part.

Field Servicable
Site created by ThomasNet Web Solutions
E-Z Hook, A Div. of Tektest, Inc. - Electronic Test Accessories