 |
|
|
 |
|
Order Desk:
1-(800)-995-HOOK (4665)
Tel. (626) 446-6175
Fax. (626) 446-0972
info@e-z-hook.com
Mailing Address:
P.O. Box 660729
Arcadia, CA 91066-0729
Corporate Address:
225 N. Second Avenue
Arcadia, CA 91006
|
|
|
|
|
| |
|
For more information on the below kits, refer to section 6 of the downloads page.
Each kit includes the following:
- 24 Nailclips (specific part no. designated in description of each kit) Colors: 4 black, 4 red, 2 each of brown, orange, yellow, green, blue, violet, gray, and white.
- 24 PE-93 Perf-eze adaptors
- 1 Perf board 4.8" X 8.5"
- Rubber feet and instruction folder
|
| 8124 |
24, p/n 81-1 Standard nailclips |
| 8324 |
24, p/n 83-8 Nailclips for multiple wires |
| 8424 |
24, p/n 84-1 High temperature nailclips |
|
Kit of 50 red nailclips and 1 T-20 nail driving tool.
|
| 8150T |
50 Red, No. 81-1 Standard nailclips |
| 8350T |
50 Red, No. 83-8 Nailclips for multiple wires |
| 8450T |
50 Red, No 84-1 High temperature nailclips |
|
Kit of 50 red nailclips and 50 PE-93 Perf-eze adaptors for use with standard .093" (2.63mm) Perf board (board not included).
| 8150PE |
50 Red, No. 81-1 Standard nailclips, 50 PE-93 Perf-eze adapters |
| 8350PE |
50 Red, No. 83-8 Nailclips for multiple wires, 50 PE-93 Perf-eze adapters |
| 8450PE |
50 Red, No 84-1 High temperature nailclips, 50 PE-93 Perf-eze adapters |
|
Harness wrap is available in various lengths, diameters, and material. See chart and part numbers for specific information.
| SE250P- 100-500 |
Polyethylene |
.375" |
.250" |
.040" |
2" |
| SE500P- 100-250 |
Polyethylene |
.562" |
.500" |
.058" |
4" |
| SE750P- 50-100(box) |
Polyethylene |
.750" |
.750" |
.065" |
6" |
| SE250N- 100-500 |
Nat. Nylon |
.375" |
.250" |
.030" |
2" |
| SE500N- 100-250 |
Nat. Nylon |
.562" |
.500" |
.030" |
4" |
| SE750N- 50-100(box) |
Nat. Nylon |
.750" |
.750" |
.040" |
6" |
|
Bag of 100 Perf-Eze inserts. Inserts snap into .093" perf board holes, locking to permit nailclips to be pressed securely into the board. Both nailclips and inserts are removable and reusable, allowing freedom of movement from hole to hole, and rotation in any direction.
Black PVC cable clamping is available in various lengths and widths, and with various hole dimensions. See chart and part numbers for specific information.
| 8114-100 |
Black PVC |
.250" |
.312" |
.050" |
.080" |
| 8114-500 |
Black PVC |
.250" |
.312" |
.050" |
.080" |
| 8114-1000 |
Black PVC |
.250" |
.312" |
.050" |
.080" |
|
The terminal number listed below indicates the number of 81-1 red nail clips included with the board.
Note: Add .375" (9.525mm) for overall length.
| 8161 |
1 |
.875" |
2.22cm |
| 8162 |
2 |
1.3125" |
3.33cm |
| 8163 |
3 |
1.750" |
4.44cm |
| 8164 |
4 |
2.1875" |
5.55cm |
| 8165 |
5 |
2.626" |
6.67cm |
| 8166 |
6 |
3.0625" |
7.78cm |
| 8167 |
7 |
3.50" |
8.89cm |
| 8168 |
8 |
3.9375" |
10.0cm |
| 8169 |
9 |
4.375" |
11.11cm |
| 8170 |
10 |
4.8125" |
12.22cm |
|
Driving tool for nail clips. The T-20 assists you in nailing in your smaller nail clips without damage.
 |
| click on image for larger view |
Top
|
©2007 E-Z-Hook, Division of Tektest, Inc. All Rights Reserved
|
|
